Tapping device BW-300For good guidance of the drill bit when drilling.
Tapping device BW-400Tapping device BW-400 - only factory assembly for new order
Collision protection BW-300Collision protection BW-300 - only factory assembly with new order
Collision protection BW-400Collision protection BW-400 - only factory assembly for new order
Demolition hammerDemolition hammer
H-100Hydraulic motor H-100 for drilling Ø 80 - 300 mm in concrete, up to 400 mm in asphalt
H-230Hydraulic motor H-230 for drilling Ø 300 - 600 mm (spacer plate type T required)
Spacer Plate Type TSpacer plate type T for drilling Ø > 400 - 600 mm
Engine mounting plate type BMotor mounting plate type B for drill motors with clamping neck C-BMH-160, DK-17EL, C-EBM33FNT
Engine mounting plate TYPE CMotor mounting plate TYPE C for drill motors C-EBL33L, DK-32 EL, C-BMS-350, C-BBM33L Extra, C-DX5L, DK-52
Combined Motor Mounting Spacer Type KCombined motor mounting spacer plate type K for drilling Ø extension by 300 mm (thickness 170 mm)
Spacer Plate Type PSpacer plate type P for drilling Ø extension by 120 mm (thickness 60 mm)
Mounting plate type SMounting plate type S for BSP-3
Engine mounting plate type UEngine mounting plate type U
Spacer Plate Type XSpacer plate type X for drilling Ø extension by 200 mm (thickness 100 mm)
Spacer Plate Type YSpacer plate type Y for drilling Ø extension by 90 mm (thickness 45 mm)
Mounting plate type ZMounting plate type Z (for motors with clamping neck) - included with P-250
DS-350DS-350, anchoring dowel set for drilling Ø up to 350mm (incl. 25 dowels)
DS-800DS-800, anchoring dowel set for drilling Ø up to 800mm (incl. 10 dowels)
Setzwerkzeug für AnkerbolzenSetting tool for anchor bolts
LeichtlöseringEasy release ring, drill bit/motor up to 3 kW
LeichtlöseringEasy release ring, drill bit/motor larger than 3 kW, 2-piece design
VP-150VP-150 Vakuumplatte
VPU-206VPU-206-Vakuumpumpe 230 V, 100 l/min
Wheel attachment kit universalWheel attachment kit universal
Wheel attachment kitWheel attachment kit
Water Flow IndicatorWater flow indicator to control the flow rate of the cooling water
Pressurized water tank 10 lPressurized water tank 10 l with 5m hose
Quick-release columnQuick-release column for sprouting (1.7m-3.0m, 500 kg load capacity)
Water Collection RingWater collection ring drill Ø 110 and 130mm
Copper RingsCopper rings for 1 1/4 UNC (50 pcs per set)"
Telescopic tapping aidTelescopic tapping aid usable length 300-350mm
Solder magnetSolder magnet for 0.5; 0,75; 1,0; 1.25 mm segment protrusion
Solder magnetsSoldering magnets as above in the wooden case (1 set = 16 pieces)
Flux (0.5 kg)Flux (0.5 kg)
Silver solder Ø1mmSilver solder Ø1mm for soldering diamond segments (1 set = 50 rods)
100 mm Drill Bit Extension Steel 1 1/4 UNC"100mm Steel Drill Bit Extension with 1 1/4" UNC; Ø 47mm
200 mm Drill Bit Extension Steel 1 1/4 UNC"200 mm steel drill bit extension with 1 1/4" UNC; Ø 47mm
300 mm Drill Bit Extension Steel 1 1/4 UNC"300 mm steel drill bit extension with 1 1/4" UNC; Ø 47mm
500 mm Drill Bit Extension Steel 1 1/4 UNC"500 mm steel drill bit extension with 1 1/4 UNC; Ø 47mm"
300 mm drill bit extension steel R 1/2"300 mm drill bit extension made of steel with R 1/2"; Ø 30mm
500 mm drill bit extension steel with flange500 mm steel drill bit extension with flange connection
1000 mm drill bit extension steel with flange1000 mm steel drill bit extension with flange connection
300 mm Drill Bit Extension Alu 1 1/4" UNC300 mm Aluminum Drill Bit Extension with 1 1/4" UNC; Ø 47mm
500 mm Drill Bit Extension Alu 1 1/4" UNC500 mm Aluminum Core Bit Extension with 1 1/4 UNC; Ø 47mm"
Transition R 1/2 socket to 1 1/4" UNC socket"Transition drill motor R 1/2" socket to drill bit 1 1/4" UNC socket
Transition 1 1/4 UNC spigot to R 1/2" spigot"Transition drill motor 1 1/4 UNC spigot to drill bit R 1/2" spigot"
Transition M33/3 to 6-hole flange connectionTransition from drill motor M33/3 to drill bit with 6-hole flange connection
Transition 1 1/4 UNC spigot to 6-hole flange connection"Transition drill motor 1 1/4" UNC spigot to drill bit with 6-hole flange connection
Transition hardened 1 1/4 UNC spigot on 6 bolt flange connection"Transition hardened for drill motor 1 1/4 UNC spigot on drill bit with 6-hole flange connection"
Transition M16 male to M14 femaleTransition M16 male to M14 female